Most motion sensor security lights are wall-mounted

Why Do Motion Sensor Light Blinks 3 Times And How To Fix It?

If you buy an item via links on this page, we may earn a commission. Our editorial content is not influenced by commissions. Read the full disclosure.

Does your motion sensor light not work the way it’s supposed to? We have a simple way on how to fix your lights if your motion sensor light blinks 3 times.

Does your motion sensor light blink from time to time?

If it does, then there’s definitely something wrong with it. But don’t fret too much because it’s most likely not a serious problem. If you notice that your motion sensor light blinks 3 times, then it’s a problem that can easily be fixed.

All you need to do is learn how to fix a motion sensor light. In this guide, we’re going to learn why you may experience motion sensor lights flickering and how to fix this problem. We’ll also mention our favorite motion sensor light, which is not prone to flickering. If you want to avoid those flickering lights, you may want to buy our top pick.

In any case, you may want to learn how to fix your motion sensor lights in the event.

Most motion sensor security lights are wall-mounted
Most motion sensor security lights are wall-mounted

Before anything else, the main concern is why your motion sensor lights are blinking in the first place.

There are a few reasons as to why you may experience this problem:

  • The first one is due to some settings. Sometimes, the settings of your motion sensor light may have been configured without you knowing.

You may also want to check the angle or the range of the motion sensor. It’s possible that the flickering detects something that isn’t even there because of the range or angle you place your motion sensors at. In that case, you may want to make some changes.

  • The next possible cause is a bad bulb. If your bulb is close to busting, then it may flicker. For this situation, you may want to replace it with a new one.
  • Another cause of the problem is the connection between the bulb and the fixture. If the wire is not connected properly, then your lights may flicker three times. This can be fixed by addressing the main connector between the bulb and the fixture.

Now that you know the possible causes of such issues, the next thing to know is how to fix the problem.

In the next section, we’ll look at the possible fixes and repairs:

How To Fix If Motion Sensor Lights Keep In Flickering?

Reset The Light

The first thing you may want to do is check the settings. In order to do this, place the motion sensors on the test setting first. This setting will allow you to check if the light is actually working. From there, you can reset your lights to get it working again.

In order to reset the light, you simply need to turn the circuit breaker off for around 30 seconds before turning it back on. Next, turn the light switch off then on again. If that doesn’t work, try to turn it off and on four times. That usually does the trick.

Change The Range Or Angle Of The Sensor

Another thing that you may want to do is adjust the range of the motion sensor. If it’s at maximum, then you may want to lessen it a bit so that it doesn’t detect unnecessary movement. You may also want to do that with the angle. You can lessen the coverage to avoid this.

Replace The Bulb

As we mentioned above, one of the reasons why you may have a flickering light is because of a bad bulb. In this case, it’s really better to replace the bulb and see if there are any changes.

Fix The Wiring

Lastly, you need to check the wiring to see that the bulb is properly connected to the fixture. Try tightening the wiring a bit and see if it works.

The Best Motion Sensor Light To Buy This 2020!

SANSI LED Security Motion Sensor Lights

SANSI LED Security Motion Sensor Lights
SANSI LED Security Motion Sensor Lights.
Via: Amazon.com

See price on Amazon

If you’re looking for a good motion sensor lights, then we recommend this one for you. The great thing about this light is that it is super strong. It has a power of 1800 lumens and a coverage of 861 square feet. Other than that, it comes with a Sensing light level which decreases the chances of false detection. So, if your light does flicker, it will most likely not be because of range or angle problems.

Best Features:

  • Dusk to dawn auto on and off
  • 1800 lumens
  • 861 square feet coverage
  • Light sensing light levels
  • 50,000-hour lifespan

Conclusion

With our guide, you’ll now know how to fix your motion sensor lights by first making a quick diagnosis (by checking out the causes we listed) and by applying the fixes we’ve mentioned.

We’ve also shared with you our favorite pick for the best motion sensor light. We believe that it is the best one to get if you want to reduce the chances of flickering problems.

Buy it now if you’re looking for the best motion sensor light in the market!

Recommended Reading: