If you buy an item via links on this page, we may earn a commission. Our editorial content is not influenced by commissions. Read the full disclosure.
Square light bulb covers sometimes need to be removed when the light bulb needs replacing. Here are the steps on how to remove square light fixture cover.
Whenever the bulb inside your square light bulb cover fixture busts, you’ll have to change it. However, it’s not going to be as easy as changing a normal light bulb because you need to remove the square light fixture first.
So how exactly do you do this anyway?
Well, we have a short 6 step guide on how to remove square light fixture cover without breaking a sweat.
In this guide, we’re going to go through the necessary tools you’ll need for this job and the actual steps you’ll need to take in order to know how to remove square light bulb cover.
What Are The Tools You Need?
In this section, we’ll give you a list of tools you’ll need and explain to you why they’re needed:
Screwdriver
The first thing you’ll need is a screwdriver. This is extremely important because the square light fixture has screws on it. You’ll need to take out the screws so that you can expose the bulb and take it out.
Ladder/Stepping Stool
If ever your lights are on the ceiling, then you’ll need a ladder or a stepping stool to reach them.
Safety Goggles
When you take off the glass fixture, there is most likely going to be a lot of dust, debris, and other particles that will fall down on your face. For that, you’ll need to wear safety goggles so that they don’t fall into your eyes. Take note that if dust particles get into your eyes, you might fall off your ladder. So, safety goggles are important for this kind of job.
Glass Cleaner
Lastly, you’ll need some glass cleaner. This is just used to clean the glass fixture so that the lights won’t be so musky.
How To Remove Square Light Fixture Cover (Easy Steps)
Now that we’re done with the tools, we can learn how to remove square light fixture.
Here are the steps below:
1. Turn Off The Lights
The first thing you need to do is turn off the lights. This is an important safety reminder because you might burn yourself if you try to touch the glass while it’s on.
2. Climb The Ladder And Put On Your Goggles
As mentioned above, you’ll need your safety goggles to protect your eyes. Before you climb the ladder, put it on first. Once it’s securely on, start climbing up with your screwdriver.
3. Take Out The Square Glass Fixture
In order to do this, you need to take out all the screws connecting the glass and the fixture. Once you take all the screws out, you can slowly take out the glass fixture.
4. Take Out The Bulb
Now that the bulb is already exposed, you can easily take it out by twisting the bulb from the fixture. After that, you can place in the new bulb.
5. Screw Back The Fixture
Once the new bulb is in its place, you just need to bring back your screwdriver, put the screws back its place and connect the glass fixture.
6. Clean The Glass
The last thing that you have to do is clean the glass. You can do this by putting some of the glass cleaners on a dry cloth and wiping all areas of the glass. After that, just wait for the glass cleaner to dry off and it’ll be perfect.
Friendly Tips
Before we end this guide, here are a few tips to take note of:
- Make sure that you let the light cool down first after you’ve just turned it off.
- Wear some rubber gloves to make changing the light easier.
- If a screwdriver doesn’t cut it, then you can use needle pin pliers.
- Make sure that there’s someone to hold the ladder for you.
Conclusion
As you can see, it’s really easy to learn how to remove square light fixture cover. In fact, it just takes 6 easy steps to do this. So, what you can do the next time you want to replace the bulb in your square light fixture, get the necessary tools, follow the guidelines, and take note of the friendly tips. It’s as simple as that!
Do all of those and you’ll get this job done in no time. Go ahead and follow this guide! It’s sure to help you with your bulb replacement.
Have a good day!
Recommended Reading: