How to Change the Color of an LED Light | KRM Light+

How to Change the Color of an LED Light – Quick & Easy

If you buy an item via links on this page, we may earn a commission. Our editorial content is not influenced by commissions. Read the full disclosure.

Learn quick, easy, and affordable ways on how to change the color of an LED light by using materials that can easily be found in your household.

Change the Color of an LED Light
How to Change the Color of an LED Light | KRM Light+

Light-Emitting Diode (LED) lights and headlights that change color make use of various materials that produce protons at various wavelengths. This is what gives the appearance of colorful lights like purple led light bulbs, sharpie light bulbs, and pink led lights for car.

By combining the primary colors (red, green, and blue) in a multi-chip LED, a lighting fixture, or any other LED device, and controlling each color’s intensities, an LED light can produce several colors.

To produce white light, the primary colors are combined in equal amounts. However, these colorful LED lights can be pretty expensive compared to a single-colored one. Luckily, there are a few DIY tips that show you how to change the color of an LED light easily.

These steps will not even require you to be an expert when it comes to LEDs. In this guide, we will be showing you three simple ways on how to change the color of an LED light.

Before you start, there are a few things you need to know about an LED light’s housing. They are made from an epoxy resin, and the light comes out because they are translucent. The translucency of an LED comes in different types – diffused and water clear.

Diffused LEDs look a bit cloudy, allowing the light to spread out evenly into the housing. Water clear LEDs are usually made of transparent plastic. They are a bit brighter than diffused ones because the materials used do not absorb or disperse light. This type is often used for light straightenings, such as for flashlights.

Using Tissue or Any Thin Paper to Achieve Colored LED Lights

Using tissue or any thin paper is one way to change the color of LED light.

If you need multi color led lights but all you have at home are white LEDs, you can change them to any color you want by following these easy steps. The things you will need are:

  • White LED lights
  • Tissue paper or any thin paper
  • Scissors
  • Colored markers
  • Clear tape

Note: If you have water clear LEDs, the goal is to give it the effect of a diffused LED to make the color look better.

Here are the steps:

  1. Take the paper and cut them into rectangles. The size would depend on the size of your LED; just cut enough to wrap each bulb from the outside. If you are using LED light strips, you must cut small sizes.
  2. Take your colored markers and shade the papers into your desired colors. Afterwards, fully wrap the paper onto each bulb. Secure them with the clear tape.
  3. Turn on your LED light and see the colorful result.

The perks of using this method are that you can easily change the bulb into a different color by taking out the paper and replacing it with a different colored one.

How to Change LED Light Color: Directly Coloring onto the Bulb

How to Change the Color of an LED Light: Directly Coloring onto the Bulb
LED lights come in various correlated color temperature (CCT) values such as warm, yellowish glow, and cool white light, among others | KRM Light+

For this method of changing LED colors, you will need:

  • White LED lights
  • Sandpaper
  • Colored markers

Here are the steps:

  1. First, sand the entire bulb until you get that diffused, cloudy effect. It is best that you use a sandpaper with a grit between 200 and 400. Next, lightly wipe the bulb to get rid of all the dust from sanding.
  2. Next, grab your colored marker and shade the whole bulb. Make sure that you cover all the spots, so no white light can escape once you turned it on. Wait until the colors have dried, and if you want to make sure that the LEDs glow nicely, give them another coating.
  3. Give it a test run by turning on your LED to see if you missed any spots. Simply shade any areas with white shining through them, then you’re done.

Compared to the previous method, this is more permanent since you are coloring onto the bulb itself.

Follow the tips above and get ready to change the Color of your LED Light quick and easy. It’s not only simple, it’s also fun and practical.

Recommended Reading: